News - June 2023 - Legal Update
News: Revoking EU law?
The Retained EU Law (Revocation and Reform) Bill is continuing its route through parliament, however, instead of revoking vast tracts of UK law as originally planned it will now only impact a short list of legislation to be removed from the statute books. It doesn’t appear that health and safety legislation will be affected.
Further information:
https://www.gov.uk/government/publications/schedule-of-retained-eu-law
News: Gas cylinder handling
A free guide has been published on risk assessing work with compressed gas cylinders.
Key steps to compliance:
- If using compress gas cylinders, see the link below.
Further information:
News: Cleaning out your concrete mixer?
New HSE research covers a known risk within the concrete production industry, i.e. hand arm vibration syndrome caused by chipping off hardened concrete in a mixer. This document advises on alternative measures for cleaning the mixer.
Key steps to compliance:
- Vibration signatures for handtools to be followed.
- HSE vibration calculator to be used to record amount of time on tools.
Further information:
https://www.hse.gov.uk/Research/rrhtm/rr1193.htm
News: HSE inspectors on site to check construction dust management
The HSE will be out and about all summer checking how construction sites are controlling dust exposure. The campaign will cover silica, wood dust and asbestos.
Key steps to compliance:
- Local Exhaust Ventilation (LEV) must be in place and be effective.
- LEV must be inspected and tested by a competent person every 14-months.
- Cleaning regime be in place to remove excess dust.
- M-Class vacuum to be used to clean up dust – Do not use brooms to sweep up dust.
- Risk assessment and safe system of work must be in place for the work equipment.
- Work equipment is inspected for signs of damage prior to being used.
- Staff are trained and competent in the use of equipment.
Further information:
Case law: Man was impaled on pipe
Linbrooke Services Limited has been fined £550,000 and ordered to pay £200,000 compensation after a worker was killed in a fall from height. Matthew Mason was fatally injured while installing a public address system at a train station. He fell from a step ladder and landed on a metal handle.
Key steps to compliance:
- Work at height must be planned and managed so that falls are prevented, and steps taken to prevent falls must be documented.
- Appropriate work equipment must be used i.e., cherry picker or tower scaffold.
- Staff must be trained and deemed competent to complete the works.
Further information:
https://www.copfs.gov.uk/about-copfs/news/company-sentenced-for-failing-that-led-to-death-fall/
Case law: Resident swallowed cleaning fluid
A Scottish care home operator has been fined £20,000 in connection with the death of a resident who drank a cleaning chemical.
Key steps to compliance:
- All hazardous substances must be stored in appropriate containers and all products must be labelled to identify the contents.
- COSHH assessments to be completed and those using the substances to be made aware of the findings.
Further information:
Case law: Logistics firm did not assess load
An error in handling a machine in two parts has landed logistics firm GCS Johnson Limited with a fine of £140,000. Anthony Clark was helping to move a large piece of machinery from one trailer to another when one part broke free and crushed him.
Key steps to compliance:
- Ensure all lifting operations are completed by competent contractors.
- Ensure suitable selection and appointment of contractor system is in place.
- Check the safe systems of work that are to be followed by the sub-contractors working on a project are suitable and sufficient. Ensure there is a paperwork trail in place that identifies that checks have been completed.
- Have suitable and sufficient site supervision arrangements in place.
- A lifting plan must be in place for all lifting operations.
Further information:
Case law: £2.2 million in fines for reversing fatality
Turners (Soham) Limited and The Haulage Group Ltd have appeared in court over the death of a depot manager who was killed when an HGV reversed out of a parking space.
Key steps to compliance:
- Traffic management plan to be in place that identifies safe movements of vehicles on site,
- People and vehicles to be separated whenever it is reasonably practicable to do so. For example, barriers are used to create walkways.
Further information:
Case law: Faulty electrical equipment
The HSE has prosecuted a company over its dangerous electrical installations and equipment.


Key steps to compliance:
- Risk assessment and safe system of work are in place for the work equipment.
- PAT is completed on electrical work equipment.
- Work equipment being used is suitable for the task.
- Work equipment is inspected for signs of damage prior to being used.
- Staff are trained and competent in the use of equipment.
Further information:
Case law: Demolition worker fell when platform collapsed
Henry Construction Projects Limited has pleaded guilty to breaching Regulation 6(3), Work at Height Regulations 2005 after a work platform collapsed beneath a worker. The company was fined £234,000 and ordered to pay £12,369 in costs.


Key steps to compliance:
- Work at height must be planned and managed so that falls are prevented, and steps taken to prevent falls must be documented.
- Appropriate work equipment must be used, i.e. scaffolding that has been erected by a competent contractor.
- Staff must be trained and deemed competent to complete the works.
Further information:
https://press.hse.gov.uk/2023/05/16/building-company-fined-234000-after-worker-falls-from-platform/
Case law: Telehandler driver crushed colleague
Eco Waste and Recycling Limited has appeared in court over an accident in which a man had his leg amputated. He had been hand sorting waste when he was run down by a telehandler.
Key steps to compliance:
- Risk assessment and safe system of work for telehandler operations.
- Pedestrians and forklift movements are separated effectively.
Staff are trained and competent in the use of a telehandler
Further information:
https://press.hse.gov.uk/2023/05/16/company-fined-after-workers-leg-amputated/
You want to stay up-to-date?
Join our mailing list!




